Quick Answer
Raghu R Naik supplies PC60RC forged rock chisel teeth, Twin Tiger rock teeth and pins made from high-grade alloy steel for high-impact rock digging on PC60-class (about 6-tonne) excavators. Call or WhatsApp +91-9745527006 or visit www.oreplus.in with your machine model and a photo of your worn tooth for a quotation.
Rock teeth take the hardest hits on an excavator. Our forged alloy-steel teeth and pins are built for impact and wear in rock, so your bucket keeps penetrating and your adapters stay protected. Last updated: November 2026.
Product Fact Sheet
| Products | PC60RC rock chisel teeth, Twin Tiger rock teeth, tooth pins |
|---|---|
| Made from | High-grade alloy steel, forged |
| Built for | High-impact rock digging, quarrying and rock trenching |
| Machine class | PC60-class compact crawler excavators (about 6 tonne) |
| Order types | Single sets and bulk orders |
| Ships to | Worldwide |
| Enquiries | Raghu R Naik — call or WhatsApp +91-9745527006 |
What Parts Do We Supply?
The reference numbers below are the ones commonly used in the trade for PC60-class rock chisel teeth and pins. Tooth and adapter shapes differ between bucket makers, so always match against your own worn part before ordering.
| # | Part | What It Does | Reference Number | Availability |
|---|---|---|---|---|
| 1 | PC60RC Forged Rock Chisel Tooth | Narrow chisel point that concentrates force to break hard rock | 201-70-14140RC (also listed as 201-70-14140) | Supplied |
| 2 | Twin Tiger Forged Rock Tooth | Wider two-point tooth for heavy penetration and corner coverage | On enquiry (depends on your adapter) | Supplied |
| 3 | Forged Tooth Pin | Holds the tooth on the adapter nose | 20X-70-00150 (commonly listed for PC60-class) | Supplied |
| 4 | Pin Retainer / Lock | Keeps the pin from working loose | On enquiry | On enquiry |
| 5 | Bucket Adapter | Carries the tooth and is welded to the bucket lip | On enquiry | On enquiry |
What Makes These Teeth Suitable for High-Impact Rock Digging?
- Forged construction: forging aligns the steel grain along the tooth shape, which suits repeated shock loads in rock.
- High-grade alloy steel: alloy steel gives a hard wearing surface with a tougher core, so the tooth resists both abrasion and chipping.
- Heat-treated for hardness: forged alloy rock teeth are typically supplied in the 48–52 HRC range. The actual hardness is stated on the batch certificate, so ask for it.
- Matching pins: a worn or bent pin lets the tooth rock and wear the adapter. Replace pins with every set of teeth.
Which Is Better for Rock: a Rock Chisel Tooth or a Twin Tiger Tooth?
It depends on the rock, the bucket and the work. The table is general guidance only, so confirm the choice with your operator and your bucket's tooth system.
| Tooth Style | Shape | Suits | Keep in Mind |
|---|---|---|---|
| Rock Chisel (RC) | Narrow chisel-shaped point | Hard, compact rock and rock trenching where penetration matters most | The narrow tip wears away faster in highly abrasive ground |
| Twin Tiger | Wider tooth with two points | Heavy-duty rock digging and corner positions of the bucket | Must match your adapter and bucket lip width |
Where Are PC60-Class Rock Teeth Used?
- Small quarries and stone extraction
- Rock trenching for pipelines, cables and foundations
- Site preparation on rocky ground
- Mining support work and dump or stockpile handling with compact excavators
When Should Rock Teeth and Pins Be Replaced?
Replace a tooth when its point has worn blunt, when it has chipped or cracked, or when the adapter nose is starting to show through. Replace the pin and retainer at the same time. Running a worn tooth slows digging, burns more fuel and can damage the adapter, which costs far more to repair than the tooth.
How Do I Order the Correct Teeth and Pins?
- Send your machine model: for example PC60-7, with the bucket make if you know it.
- Send photos: one of the worn tooth, one of the adapter and one of the pin, ideally with a ruler beside them.
- Send the number stamped on the old tooth or pin, if there is one.
- State the quantity: teeth per bucket, spare sets, or a bulk requirement.
- Receive a quotation with the exact part, and dispatch worldwide after confirmation.
Why Source from Us?
- Forged alloy-steel range: rock chisel teeth, Twin Tiger teeth and pins from one supplier.
- Fit confirmed before dispatch: we check your photos and reference numbers against the part we quote.
- Single sets or bulk: suited to one machine or a fleet of buckets.
- Worldwide shipping: packed for export with documentation.
- Direct contact: you talk to the supplier about the part and the price.
Frequently Asked Questions
- What is a PC60RC tooth?
- PC60RC is the trade designation for a rock chisel (RC) bucket tooth made to fit PC60-class compact excavators, about 6 tonnes. It is used for digging in hard rock.
- What is a Twin Tiger tooth?
- A Twin Tiger tooth is a wider bucket tooth with two points. It is used for heavy penetration and for the outside corner positions of an excavator bucket.
- What material are your rock teeth and pins made from?
- They are forged from high-grade alloy steel, built for high-impact rock digging.
- Do you supply pins as well as teeth?
- Yes. We supply forged tooth pins with the teeth. Retainers, locks and adapters are available on enquiry.
- Are these original Komatsu parts?
- They are forged replacement teeth and pins made to fit PC60-class buckets. Komatsu is a trademark of its owner and is used only to identify compatibility. OrePlus is an independent supplier and is not affiliated with Komatsu.
- How do I confirm the right tooth for my bucket?
- Send your machine model plus photos of the worn tooth, adapter and pin, and the number stamped on the old part if there is one. We confirm the fit before dispatch.
- Do you ship worldwide?
- Yes. Orders are packed for export and shipped worldwide, in single sets or in bulk.
- How do I get a quotation?
- Call or WhatsApp +91-9745527006 with your machine model and photos, or visit www.oreplus.in.
Get a Quote for PC60RC Rock Teeth and Pins
Forged Alloy Steel • Rock Chisel & Twin Tiger • High-Impact Rock Digging • Worldwide Supply
Contact: Raghu R Naik
📞 Call: +91-9745527006 💬 WhatsApp: +91-9745527006 🌐 www.oreplus.inContact: Raghu R Naik
Product Range: PC60RC Forged Rock Chisel Teeth, Twin Tiger Rock Teeth and Pins
Call / WhatsApp: +91-9745527006
Website: www.oreplus.in
Disclaimer: Komatsu is a trademark of its owner. It and the reference numbers are used only to identify the machine class and fit. OrePlus is an independent supplier, not affiliated with Komatsu. Reference numbers are those commonly used in the trade and must be checked against your own tooth, adapter and pin before ordering. Hardness figures are typical for forged alloy-steel rock teeth; the actual figure is confirmed on the batch certificate.
Posts
